Back to top
Send SMS
Home » Products » Food & Beverage Industry » Pasta Belts Filters

Pasta Belts Filters

Pasta Belts Filters
Pasta Belts Filters
Send Inquiry
Product Code : 10
Brand Name : Sefar India
Product Description

Pasta Belts Filters are widely utilized in food processing industry for drying and transporting purpose small pasta. They are made of high grade PET having woven mesh structural configuration with number of uniform size pores. These filters are provided with taped edges on demand in order to prevent fray and any mechanical abrasion. Closure of Pasta Belts Filters is made of superior quality woven fiber and stitched on back size of filters.



  • Dimensionally accurate
  • Long service life
  • No special maintenance is required




SEFAR PASTAFAB is designed for the pasta industry. These belts are used for drying and transporting 

short pasta. Belts or Cuts are defined as follows: length in mm or number of repeats; width in mm.

Order unit is per piece.

Edges, closures, pockets and rods can be designed as described underneath.

Length sides :

Heat wedge pressed:

- SEFAR Standard 

- Protects edges against fray and mechanical use

- Reverse side 20 mm pressed 

- Max. roll length 180 m 


Taped edges:

- Protects edges against fray and mechanical use 

- Edging width 30 mm

- For sanitary reasons, this solution is not recommended 


Heat cut:

- Semi-finished product for fabricator

-  Closed edges through melting

- Max. roll length 300 m


  - Monoclipper stiched 

- Closure  made from woven fabric

- Stiched on the reverse side of the belt

- Monoclipper PEEK 840 with 2 joining wires 1,4 mm brown

- Monoclipper PET 1000 HD with 2 joining wires PET 2 mm red 


Depending on the fabric and rod length, the opened part of the pocket is between 100 mm and 135 mm from the edge.

Pockets are opended on the reverse side of the belt.


- Rod 25 mm round with wheel

- Rod 10 mm round with brass cap

- Rod oval open